Guide · Asset management

How can a hotel reduce its energy costs?

The short answer

Hotel energy costs come down when the owner measures consumption first, then removes waste through operating discipline, renegotiates supply contracts, and only afterwards invests in equipment whose payback has been tested. In many independent hotels energy weighs indicatively between 3% and 6% of revenue, so a structured programme can release meaningful profit without affecting the guest experience, provided every saving is tracked per occupied room.

Hotel energy costs: stone farmhouse hotel with pool in the Italian countryside

How much do hotel energy costs weigh on the accounts?

Under USALI, the Uniform System of Accounts for the Lodging Industry, electricity, gas, water and other fuels are grouped in utilities, an undistributed expense that sits between departmental profit and GOP, the gross operating profit. In many independent hotels this line is indicatively between 3% and 6% of total revenue, and it can be higher in older buildings, in properties with a spa or heated pool, or in seasonal resorts that heat and cool large volumes for few guests.

The absolute figure for hotel energy costs says little on its own. The useful measures are energy cost per occupied room, consumption in kWh per occupied room and per square metre, and the same values compared month by month with the previous year. These ratios separate the effect of occupancy from the effect of efficiency, which is the first question an owner should ask.

Where does the energy actually go?

In a typical hotel the largest share goes to heating, cooling and ventilation, followed by domestic hot water, kitchens and laundry, lighting, and wellness areas. The exact split depends on climate, building age and services offered, which is why a reading of the bills is not enough.

Sub meters on the main circuits, or at least readings taken at fixed times, turn a single bill into information that can be managed.

  • Heating, ventilation and air conditioning, often the single largest consumer
  • Domestic hot water for rooms, kitchen and spa
  • Kitchen equipment, cold rooms and dishwashing
  • In house laundry, where it exists
  • Lighting in public areas, corridors and exterior spaces
  • Pools, saunas and steam rooms

Which savings on hotel energy costs require no investment?

Operating discipline usually delivers the first results, and it costs nothing but attention. The aim is to stop paying for comfort that nobody is using.

Each of these routines should have an owner in the team and a simple monthly check, otherwise the savings fade within a season.

  • Set heating and cooling temperatures in rooms and public areas, and limit the range guests can adjust
  • Switch unoccupied rooms and closed floors to a setback mode, and close whole wings in low season
  • Align kitchen equipment start times with actual service, rather than switching everything on at dawn
  • Run laundry and dishwashers at full load and outside peak tariff hours where the contract allows
  • Train housekeeping to close curtains, switch off lights and check thermostats when rooms are made up

How should the supply contract be managed?

In hotel energy costs, the price of energy is often a larger lever than consumption. Many owners renew contracts automatically, without comparing fixed and indexed offers, checking the capacity they pay for or reviewing the tariff bands against the hotel's load profile.

A structured review compares at least three offers on the same consumption profile, checks the committed power against actual peaks, and chooses between fixed and indexed pricing according to the owner's appetite for risk. Contract length, exit terms and the supplier's billing accuracy matter as much as the unit price. Tax treatment and any incentives linked to energy should be verified with the owner's advisers.

Which investments pay back, and how should they be tested?

Once waste has been removed, investment becomes easier to judge because the baseline is clean. Typical candidates are LED lighting with presence sensors, a building management system that controls rooms according to occupancy, heat pumps, heat recovery on ventilation and hot water, better insulation of windows and pipes, and solar panels where the building and local rules allow them.

Each project should be treated as CapEx tested against return: expected saving, investment cost, payback period, impact on maintenance and on the guest experience. Public incentives for energy efficiency are available in Italy from time to time, but eligibility and conditions change, so they should be checked with advisers before the project is approved, not after.

How AA+G helps

AA+G Hospitality Management supports owners and investors of independent luxury and upscale hotels in Italy. As asset managers we review utility costs on USALI structure, measure consumption per occupied room, and test every energy CapEx proposal against its return before the owner commits. Where public funding in Italy is available, our finance team identifies it and manages the application. We use an AI application we developed to work across more data, while senior analysts check every result.

Explore our Asset management service

Hotel energy costs checklist

  • Collect twenty four months of bills and calculate energy cost and kWh per occupied room
  • Install sub meters or schedule manual readings on the main circuits
  • Write temperature and scheduling standards for rooms, public areas and kitchens
  • Compare at least three supply offers and check committed power against real peaks
  • Rank investment projects by payback period and impact on guests
  • Review energy ratios every month alongside the USALI report
Questions

Frequently asked questions

What is a reasonable energy cost for a hotel?

Hotel energy costs are indicatively between 3% and 6% of total revenue in many independent hotels, but the range depends heavily on climate, building age, seasonality and facilities such as a spa or pool. A more reliable comparison is cost and consumption per occupied room, measured against the same hotel in previous years and against similar properties.

Should a hotel choose a fixed or an indexed energy price?

Neither is right in every case. A fixed price protects the budget from market swings, while an indexed price can be cheaper when markets fall. The choice should reflect the owner's tolerance for risk, the length of the contract and the weight of energy in the cost structure, and it should be reviewed before each renewal.

Will saving energy affect the guest experience?

It should not, if the programme is designed correctly. Most savings on hotel energy costs come from rooms and areas that are empty, from equipment running outside service hours and from better contracts. Temperature standards in occupied rooms should protect comfort, and any change guests can perceive should be tested and monitored through reviews and complaints.

Contact

Talk to AA+G about your hotel energy costs

Share your recent utility costs and occupancy figures with us, and we can discuss where savings are most likely and which investments deserve a closer look.

Development and new mandatesMaria Cristina Santaniello
+39 02 8294 1409 · sales@aaghospitality.com

This guide is for general information only and does not constitute financial, legal or tax advice. Figures are indicative and vary by asset.